Laser powder bed fusion
A laser melts the metal powder layer by layer. Review build direction and support layout for curved channels, lattices and integrated parts.
Start with laser powder bed fusion for internal channels, lattices or integrated geometries. Plan heat treatment, plate removal and precision machining around the finished part.
Send a STEP/STP model with the alloy, datums, critical dimensions and delivery condition marked for review.
Plan the print, stress relief and plate separation, then add machining where final fit or surface finish requires it.
A laser melts the metal powder layer by layer. Review build direction and support layout for curved channels, lattices and integrated parts.
Agree the heat-treatment cycle for the alloy and geometry. Plan stress relief on the plate, then wire EDM, support removal and cleaning.
Leave stock for bearing bores, threaded ports, seal grooves and datum faces. Select three- or five-axis machining according to access and the datum plan.
| Process routes | When to consider it | What to verify | Typical production lead time |
|---|---|---|---|
| LPBF + stress relief + blasting | Geometry checks and parts without critical machined fits | Printed dimensions and agreed blasted appearance | 5–8 business days |
| LPBF + heat treatment + CNC | Sealing interfaces, bearing seats and threaded ports | Final geometry, fit and sealing-face finish | 8–12 business days |
| LPBF + HIP + CNC | Projects requiring a reviewed pore-closure or fatigue-control route | Agree the HIP cycle, witness specimens and final verification | Quote after review |
See how alloy, geometry and finish shape the inspection plan.
For MS1, plan channel cleaning and verify flow. Specify the cavity finish and the hardness required after ageing.
For AlSi10Mg, choose the build direction around the lattice. Machine bearing bores against common datums and inspect alignment.
For AlSi10Mg, check curved passages for powder removal and cleaning access. Finish the seal faces and ports and agree the leak test.
For Inconel 718, review blade thickness and support access. Agree the thermal cycle, hub machining and inspection with the operating conditions in view.
Mark the sealing and fit surfaces, then review walls, channels, support removal and the machining setup.
The wall, through-hole and cleaning-slot values in the capability table are geometry references. Deep or curved passages need an accessible route for powder removal and inspection.
Use supports for heat transfer and stability where needed. Review overhang shape, surface orientation and tool access before assigning supports inside a cavity.
Review the cycle for the alloy, plate and thin sections. Plan a dimensional check after separation before committing to final machining.
Mark bore axes, datum faces and seal grooves on the drawing. Allow stock and gripping features where needed and confirm tool access after heat treatment.
Select up to two grades for a side-by-side comparison. Send both as alternatives or pick a single grade in the inquiry.
Scroll the table to see all 10 material options and their details.
| Alloy grade | Material family | Delivery condition to review | Typical applications | Acceptance to agree |
|---|---|---|---|---|
| Aluminum alloy | Stress relief, 280–300 °C × 2 h as a reference cycle | Lightweight brackets and thermal manifolds | Distortion and finished sealing interfaces | |
| Stainless steel | Review stress relief and passivation | Fluid manifolds and valve bodies | Surface condition and corrosion requirements | |
| Stainless steel | Review solution treatment and ageing | Fixtures and wear-loaded precision features | Hardness and dimensional change after ageing | |
| Titanium alloy | Vacuum stress relief, with 800 °C as a reference | Lightweight, load-bearing structures | Co-printed tensile specimens and orientation | |
| Titanium alloy | Vacuum stress relief, with 800 °C as a reference | Parts with a specified ELI composition | Powder chemistry, oxygen limit and test records | |
| Maraging steel | Ageing with HRC 50–54 as a target | Conformal cooling inserts and tooling | Hardness and dimensional change after ageing | |
| Nickel alloy | Review solution treatment and ageing | Impellers and parts for elevated temperature | Material condition and service-specific tests | |
| Nickel alloy | Agree thermal cycle and finish for the grade | Corrosion-resistant flow components | Material condition and service-specific tests | |
| Copper alloy | Agree thermal cycle and finish for the grade | Heat transfer components and electrodes | Conductivity in the delivered condition | |
| Cobalt-chromium alloy | Agree thermal cycle and finish for the grade | Wear-loaded surfaces | Exact alloy, hardness and wear-test conditions |
Agree the tensile strength, elongation, specimen orientation and delivered condition for the selected alloy. Request witness specimens where the drawing calls for mechanical evidence.
Select a grade in the table to start comparing.
Review the build envelope, finishing route and inspection plan for the selected alloy and drawing.
| Item | Capability and conditions |
|---|---|
| Materials by process | AlSi10Mg · 316L · 17-4PH (1.4542) · Ti-6Al-4V Grade 5 / Grade 23 · MS1 (1.2709) · Inconel 718 / 625 · CuCrZr |
| One-piece build envelope | 250 × 250 × 325 mm · 400 × 400 × 400 mm · 600 × 600 × 600 mm |
| Layer thickness | 0.03–0.06 mm |
| Typical as-built linear tolerance | ±0.10 mm (≤100 mm) / ±0.15% |
| Selected features after secondary work | ±0.005–0.01 mm |
| Minimum wall, through hole and channel | 0.5–0.8 mm · Ø1.0–1.5 mm · 0.8–1.0 mm |
The first envelope is standard. Larger configurations depend on the alloy, orientation, stress relief and distortion review. Tight feature values are after CNC finishing.
| Item | Capability and conditions |
|---|---|
| Material-specific stress relief and ageing | AlSi10Mg 280–300 °C × 2 h · Ti-6Al-4V 800 °C · 17-4PH / MS1 · MS1 HRC 50–54 · HIP |
| Wire EDM, support removal and enclosed channels | Wire EDM · AFM |
| Machining allowance, selected fit and sealing face | 0.3–0.8 mm · ±0.01 mm · Ra 0.4–0.8 μm |
| Relative density and associated tests | 99.5–99.8% target by alloy and build. Archimedes or metallography, tensile and hardness on build coupons, X-ray or CT where agreed. |
Agree heat-treatment program, supporting coupons and documented acceptance on the drawing.
| Item | Capability and conditions |
|---|---|
| Standard and complex quotes | 2–6 h · 12–24 h |
| Metal print with stress relief, then with CNC finishing | 5–8 business days · 8–12 business days |
| Build traceability | Material lot, powder refresh where relevant, build map, heat treatment or cure and inspection records. |
Process terms and design guidance
ISO/ASTM 52900 · ISO/ASTM 52911-1
Powder-bed alloy specifications
316L · ASTM F3184
Ti-6Al-4V Grade 5 · ASTM F2924
Ti-6Al-4V Grade 23 (ELI) · ASTM F3001
Agree the standard edition, material condition and acceptance tests on the drawing or order.
Select the inspection records and choose protection for critical surfaces and ports before production.
Agree the datum alignment, measurements and report scope. Use scans for complex surfaces where the inspection plan specifies them.
Choose density, tensile or hardness checks according to the alloy and build. Agree the inspection region and acceptance limits for radiography or industrial CT.
Protect threads, sealing faces and openings as specified. Match the packaging and part identification to the delivery requirements.
Select the route, alloy and acceptance records. Attach the brief to carry those choices and your notes into the drawing inquiry.
Your choices and entered requirements will appear here.
Agree the target, specimen location and method. Archimedes and metallographic checks can assess density, while CT may be specified to inspect internal features in agreed regions.
Specify the fit and nominal diameter. For close bearing or sealing fits, plan stock for drilling, reaming, boring or grinding and inspect after heat treatment and finishing.
Consider it for curved internal channels, lattices or integrated assemblies. Compare total effort for supports, cleaning, heat treatment, finishing and inspection against the drawing requirements.