For cut-to-length profiles and repeat hole patterns, compare dedicated fixtures, automatic feeding, and general CNC. Define drilling, reaming, countersinks and threads from the drawing and match the route to lot size and part revision.
H7 diameter on drawings
Ø10 H7
Geometry and position callouts
ISO 1101
Reference for fixture trial
2–4 days
Confirm the fixture, incoming stock, operations and inspection scope before scheduling.
Multi-station drilling cell machining metal workpieces in a dedicated fixture
Dedicated drilling, general CNC and sheet-hole cutting
Compare annual demand, releases per year, machining steps and drawing revisions before committing to tooling.
Engineering criterion
Dedicated multi-station drilling
General CNC machining
Sheet laser or punching
Order profile
Stable part family, repeat releases and consistent stock.
New designs, frequent revisions, mixed parts or low volume.
Flat sheet with accessible through-holes and repeated patterns.
Hole features
Use qualified sequences for repeated drills, reams, recesses or threads.
Assess angled bores, multiple faces and features needing milling or thread milling.
Cut or punch the through-profile. Add machining for blind bores, precision fits or threads.
Cost and setup drivers
Compare fixture investment, changeover and tool life with the verified cycle time.
Account for programming, workholding and the number of setups.
Cost depends on sheet yield, cut path or punch tooling and any follow-up work.
Acceptance focus
Verify locator repeatability, tool-change drift, and the equivalent output across stations.
Verify datum transfer, tool access and relationships across faces.
Check hole profile, burrs, edge deformation or taper as applicable.
Four routes for cut-to-length and hole machining
Cut to length and establish the datum
Record the stock grade and condition, such as 6063-T5 for extruded profiles, 6061-T6 for extrusions or plate, and 304 or 316 for stainless stock. Check the incoming section, straightness and end condition.
On hollow stock, agree clamping pressure and access to burrs inside the section. Identify the cut face used for downstream location.
Repeat hole groups and automatic feeding
Review fixed hole patterns, jig location and automatic feed for stable parts. Choose drilling, reaming, tapping or countersinking by feature and verify exit-side burrs.
Trial how stock feeds and sits against stops. Compare each station’s first piece, then define checks for tool wear and changeover.
Drilling, reaming, recesses and tapping
Plan the pilot hole and finishing allowance around the drawing. Specify which holes are drilled, reamed, counterbored, countersunk or threaded.
Check blind-hole clearance, chip removal and tool access before combining steps in one setup. Verify the finished profile and remove exit burrs where accessible.
Opposite-face machining and datum transfer
Register the flipped part to the approved datums and check inter-face location. Use flexible CNC review when revisions, hole layouts or part families change frequently.
Use a first-side locator only where the drawing and fixture support it. Agree the inspection setup and measure both patterns against the defined datum system.
Hole features and drawing acceptance
Choose a hole feature to see what to specify and how to verify it. The dimensions shown are drawing examples. Production limits are confirmed from material, geometry and trial parts.
Through and blind drilling
Typical use
State diameter, effective depth, through or blind condition, and the hole pattern. For deep holes provide the depth-to-diameter ratio and the exit wall or available clearance.
Inspection item
Review chip removal, tool reach and exit burrs. Select separate checks for diameter, depth and position.
H7 reamed locating holes
Typical use
Match the reamed bore to the mating pin and fit. Example: Ø10 H7 = 10.000–10.015 mm per ISO 286-2. Define axis position separately on the drawing.
Inspection item
Agree reaming allowance and a calibrated bore gauge or suitable limit plugs for the final hole. Check fit at the agreed finish condition.
Internal threads and blind-hole clearance
Typical use
Provide thread standard, pitch, class and full thread depth. Example: M6 × 1–6H. Give drill depth separately and allow for lead, tool clearance and chips.
Inspection item
Match calibrated GO/NO-GO thread plugs to the specified thread system and class. Verify usable depth separately when the joint depends on it.
Cylindrical recesses and conical countersinks
Typical use
State the screw head or mating feature. Give diameter and depth for a counterbore, or the included angle and reference diameter or depth for a countersink.
Inspection item
Confirm remaining wall thickness and screw-head seating. Verify cylindrical depth or the conical seat using the specified gauge, profile or approved mating part.
Inspection item
Test method
Drawing and acceptance requirements
Incoming section and cut length
Measure from the drawing datum. Agree length tolerance, squareness and deburring limits.
For example, 420 ±0.15 mm from the marked end face. State whether downstream machining uses the sawn or finished face.
Hole size, location and depth
Use a size gauge or bore instrument for diameter. Use CMM or an agreed functional gauge for the pattern and datum relationships.
Example position callout: ⌀0.05 mm to A | B | C under ISO 1101 with the datum system defined. Use the drawing’s size and position requirements independently.
Threads, burrs and recesses
Verify the internal thread with suitable plugs, the recess with depth or profile measurement, and the exit edge by the approved burr criterion.
Separate the drill depth from full thread depth. Specify surface treatment and the condition for final gauging.
First, last and changeover checks
Identify sampling and checks after tool, fixture or datum changes. Compare readings against the approved first piece.
Record lot, station and drawing revision. Specify the treatment of suspect parts since the last accepted check.
Match the locating scheme and bore checks to the actual assembly interfaces.
Cut and drilled extrusion blocks
Set cut length from the datum end and check hole pitch after seating against the fixture stop.
Bracket with holes on two faces
Agree the flipping datum and check alignment between the two faces on a first article.
Repeated fixture or mounting plates
Compare drill, ream and thread sequence. Verify the mating pattern and mark tool replacement checkpoints.
Pin and thread gauges, CMM and shipment protection
Hole size and thread gauging
Use limit plugs or bore instruments matched to the finished hole. For metric threads, agree the specified class and the ISO 1502 gauging method. Record the tool and inspection stage.
CMM checks for hole patterns
Build the CMM alignment from the drawing’s datums. At first-article and agreed rechecks, record each required pattern or opposite-face relationship and tie results to the drawing revision.
Burr removal and lot protection
Clear chips from blind holes and hollow sections. Check accessible exits for burrs, then use dividers or agreed thread protectors. Preserve lot identification with the inspection record.
From drawing review to lot release
Drawing, datums and order volume
Review stock, datum and order pattern.
Fixture preparation and process trial
Trial feeding, workholding and tool sequence.
2–4 days · Reference for fixture trial
First article and gauge approval
Approve first-piece cut, hole positions and gauging.
Production checks and shipment
Complete lot checks and protect finished threads and faces.
5–10 days per lot · Reference solely for planned repeat lots
Frequently asked questions
When is a dedicated fixture worthwhile?
Compare annual demand, release size, changeover and tooling life. Dedicated tooling suits stable repeat geometry after first-article approval.
Can hole position be held after flipping?
Specify a repeatable datum and locator scheme. Measure both faces and their relative positions after flipping on a first article.
Can drilling and tapping run in one sequence?
Review access, chip evacuation, thread depth and tool-break detection. Approve the sequence and verify finished threads separately.
What should I specify for deep drilling?
Provide diameter, usable depth, material, entry geometry and required straightness. Review guidance, tool reach, coolant and chip evacuation. Confirm any specialized deep-drilling route on the part geometry.
How much extra drill depth does a blind thread need?
Start with required full thread depth. Add the selected tool’s lead, runout and clearance for its chip behavior, accounting for the drill-point shape and remaining wall. Confirm available depth before tooling.
How will anodizing affect finished threads?
Agree coating type, thickness and masking on the drawing. Qualify any machining allowance or masking on a sample before production. Final gauging follows the specified surface condition.
Send drawings for engineering review
Send a drawing or hole table with the stock form and grade, per-lot quantity, annual demand and final inspection requirements.
Engineering review brief
Select the route, feature and stock form. Add the alloy, critical dimensions and repeat demand to pass them to the quotation form.