Skip to content

Large-format 3D printing and segmented assemblies

Plan one-piece or segmented builds for full-size housings, ducts and fixtures.

Send the CAD model with functional datums, allowable seams and the final inspection state. Review support removal, distortion and transport before the build.

Large ribbed printed housing with a curved duct on a granite table
1,500 × 750 × 550 mmLarge SLA envelope for review
914 × 610 × 914 mmFDM build envelope
≤0.05 mmSeam step on agreed joined surfaces
2–6 / 12–24 hTypical / complex quote response

Build envelopes and as-printed tolerances

Choose a route to see build dimensions and the features that need review. Support, rotation, material and finishing allowance can change the usable space.

Large-format SLA

For appearance models, vehicle cowls and ducts. Agree which faces should stay free of support marks, which passages must be cleaned, and how the part will be cured and finished.

Build envelope
800 × 800 × 550 mm · 1,500 × 750 × 550 mm
Typical as-printed linear tolerance
±0.10 mm (≤100 mm) / ±0.15%
Layer thickness
0.05–0.10 mm
Wall, through hole and channel minima
0.8–1.0 mm · Ø0.8–1.0 mm · 0.6–0.8 mm
Large smooth automotive cowl beside a height gauge
Industrial 3D printing processes
ItemCapability and conditions
LPBF / DMLS / SLM250 × 250 × 325 mm · 400 × 400 × 400 mm · 600 × 600 × 600 mm
SLA800 × 800 × 550 mm · 1,500 × 750 × 550 mm
MJF380 × 284 × 380 mm · 350 × 260 × 350 mm
SLS340 × 340 × 600 mm · 700 × 380 × 580 mm
PolyJet490 × 390 × 200 mm
FDM914 × 610 × 914 mm

Layer thickness controls Z steps. Dimensional tolerance is assessed separately for geometry, orientation, material shrinkage and finishing.

Check one-piece fit and split options

Enter the outer dimensions in millimeters. The check tries all axis-aligned orientations and uses the recommended single-part size for MJF.

Enter three positive dimensions to start.

This is a bounding-box check. Angle, supports, warpage and joint allowance can change the build plan. Set seam positions and lead time during drawing review.

Plan joints and control large-part warpage

Two panel segments with interlocking joints and locating pins

Locate and join segments

Place seams where the structure and appearance can tolerate them. Consider keys, overlaps, fasteners or bonding only after reviewing material, load and service conditions. A visual-model joint should not be assumed suitable for a pressure, sealing or structural function.

Reinforcing ribs on the inside of a curved thin-wall enclosure

Stiffen large thin walls

Large flat regions, slender walls and abrupt thickness changes can be sensitive to thermal effects and handling. Orientation, local reinforcement and process choice should be evaluated together. A small sample does not always reproduce the distortion behavior of a full-size part.

Joint methodTypical applicationAgree before release
Locating keys or pins with adhesivePolymer covers and non-pressurized ductsAdhesive compatibility, appearance, seam step and temperature in service
Registered flange and boltsFixtures or assemblies shipped in pieces for on-site assemblyLocating repeatability, fastener access and loads in the assembled state
TIG or laser welding with finish machiningOversize metal assemblies with a weldable alloy and accessible jointsWelding procedure, stress relief and critical datums after machining
Large parts and joining
ItemCapability and conditions
Polymer segment joiningSLA, SLS, MJF and FDM. Locate with keys or dowels, bond and reinforce as required, then align, sand and finish.
Overall dimensions and seam step±0.3–0.5 mm / ±0.15% · ≤0.05 mm
Metal segment assemblyReview TIG or laser welding followed by finish machining.

Confirm inspection for overall tolerance and visual seams before selecting the split.

Choose from four large-format material families

Select candidate grades to add to the brief. Exact grade, build platform, cure or heat treatment and test conditions are agreed with the drawing.

SLA photopolymer resins

Compare appearance and fit; validate cure and color on the specified finish.

SLA · Process details

FDM engineering filaments

Match load direction to layer orientation. Check chamber and support compatibility for high-temperature grades.

FDM · Process details

Metal LPBF powders

Specify the alloy condition and the features to finish by machining. Include dimensional or test evidence in the acceptance plan.

LPBF · Process details

Mechanical data for four representative grades

These manufacturer values are specific to the stated test and specimen condition. Use the actual build and finish to agree part acceptance and allowable temperature in service.

Reference gradeTest conditionTensile resultHeat deflection temperature (HDT)
Somos EvoLVe 128 ↗UV post-cured56.8 MPa · at yield · ASTM D638M52.3 °C (0.46 MPa) · ASTM D648
ULTEM 9085 ↗F900, T16 · 0.254 mm68.1 MPa (XZ) / 39.4 MPa (ZX) · at break · ASTM D638178.4 °C (66 psi, XZ/ZX) · ASTM D648
EOS PA 2200 ↗Dry specimen48 MPa (X/Y) / 42 MPa (Z) · ISO 527-1/-2157 °C (X) / 145 °C (Z) (0.45 MPa) · ISO 75-1/-2
Ti-6Al-4V Grade 23 ↗Heat-treated, EOS M 290, 40 µm1,050 MPa · EN ISO 6892-1Agree test and temperature for metal

3D scan inspection and protective packing

Define how the finished part will be supported, measured and shipped.

Blue-light scanner projecting lines onto a large printed frame

Blue-light scanning and deviation maps

For a complex profile, agree the CAD alignment, datums and whether to measure free or fixtured. Request a deviation map or separate measurements of the critical features.

Gloved hands fitting masking plugs to a housing in a foam cradle

Surface protection and crating

Protect threads and datum faces, support long spans with shaped foam and label segments for reassembly. Confirm crate and destination requirements before shipping.

Submit CAD and an engineering brief

Include the final assembly state, allowed seams, critical tolerances and visible surfaces.

Large-format printing brief

Use the size check or select a material, assembly, inspection or packing option to generate a brief.

Contact and CAD files

Drawings & reference files

STEP/STP, PDF, JPG or PNG. Up to 3 files; 10 MB each, 20 MB total.

No files selected

    No drawing yet? Describe the part and application below.

    FAQs

    Must a large part be printed in one piece?

    No. Segmentation may be practical if the joint, alignment and final acceptance are designed appropriately. The choice depends on function and appearance.

    How do free-state and fixtured measurements differ?

    A thin housing can deflect under its own weight. Define the support points and CAD alignment. If the part is used bolted to a rigid frame, agree whether inspection should simulate that installation.

    Does fitting inside the machine envelope guarantee feasibility?

    No. Orientation, supports, margins, thermal behavior and finishing access can still limit the route.

    What should I send, and can we sign an NDA?

    Attach a STEP or STP model and add a PDF drawing for critical dimensions, datums, allowable seams and inspection state. A mutual NDA can be arranged.

    KEEPWIN · LANGUAGE

    Choose your language

    Select the language you prefer for your visit.

    You can change your language anytime in the menu.