Skip to content

Laser marking and engraving

Mark logos, batch IDs, serial numbers or direct-part codes. Review the actual substrate and coating, marking location, production data and how readability will be verified.

Example drawing callout for depth
0.15 ±0.03 mm
Formal DPM quality test reference
ISO/IEC 29158:2025
Part sampling schedule estimate
1–3 days

Confirm scheduling and acceptance after reviewing the substrate, artwork and inspection scope.

Laser marking workstation, a fixtured metal plate and parts with sample codes

Choosing between fiber, MOPA fiber, UV and CO₂

Compare the routes on the actual substrate and finish. Verify contrast, thermal effects and marking area on a real sample.

Engineering criterionFiber · 1064 nm classMOPA fiber · adjustable pulsesUV · 355 nmCO₂ · 10.6 μm class
Typical substratesMetal parts, including selected stainless, titanium and aluminum alloys.Selected stainless or titanium for dark marks and selected anodized or coated metals.Selected molded plastics. Confirm the exact resin, pigment and additives.Review for nonmetal labels, packaging or suitable coated surfaces.
Marking mechanismReview material removal for engraving and contrast on actual metal.Adjust pulse width and energy for surface color or selective removal.Establish reliable contrast with limits on foaming, melt edges and distortion.Check absorption and thermal effects on the actual nonmetal or coating.
Fine-feature limitsConfirm minimum stroke and depth together on a coupon.Verify edge definition and repeatability across the marking field.Check small text, modules and quiet zones on the final part.Use a real sample to check edge definition and readable size.
Typical useMetal scales, mold IDs and engraved identifiers.Dark mark on stainless or a light mark on compatible anodized parts.Molded part lot codes and small symbols.Larger markings on suitable labels or packaging.

Laser marking routes and design review

Annealing and selective coating removal

  • Trial contrast or selective coating removal on the finished part. Specify whether exposing the substrate is allowed and assess any effect on its protective coating.
  • Evaluate dark annealed marks on stainless and selective light marks on anodized aluminum separately. If the coating protects the part, test the affected area under project conditions.

Laser parameters and acceptance criteria

Compare four processes. Approve the result on a representative sample before setting production limits for depth, position or readability.

MOPA annealed dark marking

Typical use
Evaluate on the specified stainless or titanium alloy and actual polish or brushing. Approve the dark tone and permitted heat tint.
What to verify
Verify contrast and edge definition. Agree separate corrosion testing where the marked area is exposed to sweat, cleaners or other corrosive conditions.
What to verifyTest methodDrawing and acceptance requirements
Artwork and placementUse the approved artwork and fixture datum. Check offset, orientation and size in the named area on the first part.Send vector artwork or approved data fields. Dimension the marking box, reference datum and orientation in the drawing; approve a finished sample.
Contrast, depth and finishCompare against a limit sample under agreed lighting. For recessed features, use calibrated optical or profile measurement appropriate to the geometry.Specify contrast by a limit sample and any engraving depth in mm. Sample each substrate–finish combination, including coating removal or discoloration limits.
Code quality and dataSeparate ordinary scan checks from formal verification. A formal DPM report records the measured grade and verification conditions.For direct part marks, agree an applicable ISO/IEC 29158 verification setup and minimum grade. Check payload, syntax and uniqueness separately against the approved data.
Sequence and durabilityRepeat the agreed appearance or readability test after applicable coating, cleaning or wear exposure.Identify whether marking is before or after anodizing, plating or painting. If cleaning or abrasion matters, verify the approved mark after the agreed exposure.

Technical references · ISO/IEC 29158:2025 · ISO/IEC 16022:2024 · ISO/IEC 15415:2024

Typical parts and marking checks

Choose the marking zone and inspection based on the real material, finish and end use.

Decorative logos on watch clasps and cases

Approve the placement and appearance on the same brushed, polished or coated finish as production.

Traceability marks on housings and instrument parts

Use a flat, accessible zone away from seals and wearing faces. For regulated identifiers such as UDI, the device owner must define the applicable data and validation requirements.

Lot codes and symbols on molded parts

Trial the actual resin and color; inspect contrast, surface deformation and legibility after handling.

Code verification, depth measurement and surface protection

DPM quality and data controls

A reader checks decoding. For formal grading, agree the verifier, illumination, aperture and minimum grade. Check uniqueness and payload against the approved file independently.

Depth and master-sample comparison

Measure the profile from the agreed local surface at the designated points. Check contrast and edge clarity against an approved sample under specified lighting.

Protection of marked faces

Check protective film for clean removal. Orient finished faces to avoid rubbing and use the packaging record to preserve batch traceability.

From artwork review to lot release

  1. Artwork, data and finish review

    Approve artwork, fields, datum and finish revision.

  2. Fixturing and trial marking

    Trial settings and marking order on real parts.

    1–3 days · Part sampling schedule estimate

  3. First article and read approval

    Sign appearance and validate code or depth where specified.

  4. Variable data and lot release

    Check variable data by lot and record the approved revision.

    3–7 days · Batch marking schedule estimate

Frequently asked questions

Can coated metal and plastic use the same settings?

Review each substrate, color and coating separately. Establish contrast, heat effects and any coating damage on a real sample.

Is a successful scan enough for acceptance?

Agree whether simple reading or formal grading is required. For graded codes, record lighting and verifier settings and check data integrity separately.

What should be supplied for variable marking?

Provide sample payloads, ranges, formatting rules and the mapping to work orders. State how duplicates, skipped numbers and reworked parts should be recorded.

Can annealed marks affect stainless corrosion resistance?

It depends on the alloy, surface and heat input. Where corrosion matters, trial the actual conditions and verify the marked area against the agreed test and exposure.

Should marking happen before or after coating?

Review both sequences with the final appearance and corrosion requirement. Coating can fill a recess, while post-coating removal can expose metal. Approve the final state on a sample.

Can a small code be marked on a cylindrical surface?

Provide diameter, allowed arc, code size and scan orientation. Verify focus and mark distortion on a representative part, then check access with the intended reader.

Send drawings for engineering review

Send an approved artwork file or a sample data sheet with the marking area, material, surface condition, quantity and required inspection.

Engineering review brief

Choose a process focus and describe the critical requirements. Your choices will be included in the enquiry.

Drawings & reference files

STEP/STP, PDF, JPG or PNG. Up to 3 files; 10 MB each, 20 MB total.

No files selected

    No drawing yet? Describe the part and application below.

    KEEPWIN · LANGUAGE

    Choose your language

    Select the language you prefer for your visit.

    You can change your language anytime in the menu.