Rapid prototype and bridge tooling
Trial parts in the intended resin help assess shrinkage, snap fits and assembly before committing to a production tool.
Process details ↗From rapid T1 validation with aluminum tooling to multi-cavity production with S136 or H13 steel tools. Upload your 3D CAD and key requirements for DFM feedback, a review of flow risks and a quote by project stage.
Use your target volume, level of part integration and tooling budget to compare mold materials, gate design and the main cost drivers.
Trial parts in the intended resin help assess shrinkage, snap fits and assembly before committing to a production tool.
Process details ↗Balance filling, cooling and cavity-to-cavity consistency for repeat orders. Assess tool steel and the runner system in the quote.
Process details ↗Pair a rigid substrate with a compatible elastomer. Verify adhesion or mechanical retention and check grip or sealing requirements.
Process details ↗Locate threaded inserts, bushings or contacts in the tool. Define position, resin coverage and pull-out or torque checks as required.
Process details ↗| Route | Example tool materials | Production stage | T1 trial timing | Runner and gate planning | Cost driver |
|---|---|---|---|---|---|
| Rapid prototype and bridge tooling | 7075-T6 / P20 | Trial and bridge volume | 10–15 business days | Cold runner or simple gate | Tool investment and design iteration |
| Multi-cavity production tooling | H13 / S136 / 718H | Repeat production | 3–4 weeks | Balance cavities and assess hot runner | Cavity count, automation and cycle time |
| Two-shot and soft-touch overmolding | NAK80 / S136 | Integrated assemblies | Confirm with the tool plan | Gate sequence for the substrate and soft layer | Second molding setup and assembly savings |
| Insert molding with metal components | H13 / S136 | Integrated assemblies | Confirm with the tool plan | Plan flow around insert locations | Insert loading, locating and inspection |
These examples cover wearable support housings, transparent optical components and fluid valve bodies. Mark critical fits, visible surfaces and functional checks on the drawing.
Check the fit of clips, bosses and mating surfaces. Set the assembled reference and the method for checking warpage.
Define the clear aperture, resin and light transmission or haze targets. Agree on where gates and weld lines can appear.
Assess PEEK by grade, service temperature and fluid compatibility. Define thread geometry, sealing surfaces and any functional test.
Review geometry, ejection and cosmetic requirements before tool design. Match acceptance dimensions to the material and measurement conditions.
| Feature | Review items |
|---|---|
| Corrosion-resistant or high-polish tooling | S136 / Stavax ESR · HRC 48–52 · 1.2083 / 1.2316 |
| Wear-resistant tooling | 8407 / Orvar Supreme · HRC 48–52 · NAK80 HRC 37–41 · ASP-23 / HAP40 |
| Prototype or short-run tooling | P20 / 718H HRC 30–36. 7075-T6 aluminum tooling for selected unfilled resin prototypes. |
| Cavities and runner balance | 1 / 2 / 4 / 8 / 16 / 32 / 64 cavities; family tools with adjustable flow and valve-gated hot runners as required. |
| SPI 101 / 102 / 103 | ≥1,000,000 · 500,000–1,000,000 · 100,000–500,000 |
| SPI 104 / 105 | 10,000–100,000 · Al 5,000–10,000 |
| Customer tool ownership and transfer | Customer ownership after payment as contracted, with drawings, asset identification, cycle counter, preventive maintenance and transfer support. |
The listed cycle figures are planning ranges. Define the required life, resin and maintenance conditions when ordering the mold.
Use gradual transitions and core out thick sections. Check rib roots, boss support and corner radii for sink and distortion.
Mark the cosmetic faces and specify the polish or texture standard. Set draft based on texture depth and ejection direction.
| Feature | Review items |
|---|---|
| Wall thickness, ribs and bosses | On the drawing, indicate nominal walls and critical ribs or bosses. Identify thick-to-thin transitions for tooling review. |
| Draft and surface texture | Call out the SPI or VDI 3400 grade and mark where the texture starts and ends. Review textured faces against the ejection direction. |
| Gates and parting lines | Agree on acceptable gate marks, flash and parting-line position before cutting steel. |
Use these figures for an initial review. The approved drawing, process route and quote set the requirements for the part.
| Item | Capability and conditions |
|---|---|
| ABS | Chi Mei PA-757 / PA-747 · LG HI121H · SABIC Cycolac MG47 / FR15U |
| PC | Covestro Makrolon 2405 / 2805 / 2458 · SABIC Lexan 141R / 940A / EXL1414 |
| PC/ABS | Covestro Bayblend T65 XF / FR3010 · SABIC Cycoloy C2950 / MC1300 |
| PA6 / PA66 / PA12 / PPA | BASF Ultramid B3S / A3EG6 · Zytel 101L / 70G33L · EMS Grilamid TR90 |
| POM / PP | Hostaform C9021 · Delrin 100P / 500P · Moplen HP500N · Formosa 1120 · SABIC PP 575P |
| PEEK / PPSU / PEI / PBT / TPU / TPE | Victrex 450G · Radel R-5000 · ULTEM 1000 / 1010 · Kraiburg TPE |
| Customer-supplied or specified resin | Grade, origin and lot can be specified. Regrind or substitution requires written approval. |
| Grade-specific documents | COA, TDS and SDS. For relevant grades, request filler content, UL 94 Yellow Card by thickness, transmittance, haze or contact-compliance documentation. |
| Item | Capability and conditions |
|---|---|
| Electric thermoplastic presses | 50–350 tf · 30–1,100 g · 450 × 450 × 200 mm |
| Large thermoplastic presses | 450–1,300 tf · 1,500–6,500 g · 950 × 750 × 400 mm |
Rows show clamp force, shot mass and part envelope. Material, tool fit and usable shot size are evaluated together.
| Item | Capability and conditions |
|---|---|
| Noncritical features up to 30 mm | ±0.05–0.10 mm |
| Critical fit in PC, ABS and PC/ABS | ±0.015–0.030 mm |
| Critical dimensions in PA, POM or PP | ±0.03–0.05 mm |
| Selected LSR features | ±0.05–0.10 mm · ISO 3302-1 M1 |
| Conditioning and measurement | 23 ±2 °C · 50 ±5% RH · 24 h · VMM / CMM |
| Agreed cosmetic color reference | D65 · ΔE ≤ 0.8–1.0 · ΔE ≤ 0.5 |
| Gate vestige, flash and mismatch by drawing | 0.10–0.15 mm · 0.02–0.03 mm (TP) / 0.03–0.05 mm (LSR) · 0.02–0.03 mm |
Ranges apply to selected parts and features. Agree size, resin, shrinkage and cosmetic master before FAI. DIN 16742 / ISO 20457 and ISO 3302-1 references follow the drawing and specified edition.
Specify virgin or customer-supplied resin as needed. Verify shrinkage, heat performance and any COA, TDS or applicable UL 94 documentation for the exact grade. Obtain written approval for resin substitutions or regrind.
| Resin family | Example grades | Selection criteria | Typical uses |
|---|---|---|---|
| ABS | Chi Mei PA-757 · SABIC Cycolac MG47 | Surface appearance and grade-specific flame rating. | Consumer housings and cosmetic panels. |
| PC | Covestro Makrolon 2405 · SABIC Lexan 141R | Impact requirements, light transmission and haze for clear grades. | Optical covers and impact-resistant housings. |
| PC/ABS | Covestro Bayblend T65 XF · SABIC Cycoloy C2950 | Balance appearance, impact and application temperature. | Device panels and handheld enclosures. |
| PA6 / PA66 / PA12 | BASF Ultramid B3S / A3EG6 · Zytel 70G33L | Specify filler and moisture-conditioning state. | Load-bearing brackets and insert supports. |
| POM | Delrin 100P · Hostaform C9021 | Check shrinkage, sliding friction and wear. | Gears, sliders and moving joints. |
| PEEK / PPSU / PEI | Victrex 450G · Radel R-5000 · ULTEM 1000 | Verify temperature range, media resistance and exact grade. | Fluid-handling and heat-exposed components. |
| TPE / TPU | Kraiburg TPE | Specify hardness and validate adhesion to the substrate. | Soft grips, edging and sealing features. |
| Feature | Review items |
|---|---|
| ABS | Chi Mei PA-757 / PA-747 · LG HI121H · SABIC Cycolac MG47 / FR15U |
| PC | Covestro Makrolon 2405 / 2805 / 2458 · SABIC Lexan 141R / 940A / EXL1414 |
| PC/ABS | Covestro Bayblend T65 XF / FR3010 · SABIC Cycoloy C2950 / MC1300 |
| PA6 / PA66 / PA12 / PPA | BASF Ultramid B3S / A3EG6 · Zytel 101L / 70G33L · EMS Grilamid TR90 |
| POM / PP | Hostaform C9021 · Delrin 100P / 500P · Moplen HP500N · Formosa 1120 · SABIC PP 575P |
| PEEK / PPSU / PEI / PBT / TPU / TPE | Victrex 450G · Radel R-5000 · ULTEM 1000 / 1010 · Kraiburg TPE |
| Customer-supplied or specified resin | Grade, origin and lot can be specified. Regrind or substitution requires written approval. |
| Grade-specific documents | COA, TDS and SDS. For relevant grades, request filler content, UL 94 Yellow Card by thickness, transmittance, haze or contact-compliance documentation. |
Define which characteristics need first-article records, production sampling or separate functional testing.
Use VMM or CMM where appropriate for the dimensions and datum system. Record conditioning and inspection coverage in the plan.
Compare with the approved color sample under the specified light. Define limits for visible flash, parting lines and gate marks.
Separate cosmetic and optical surfaces in fitted trays. Specify cleanliness, ESD protection and lot identification if the project requires them.
Check wall transitions, draft, parting and gate location before settling the tool concept.
Confirm tooling material, cavities and coating or texture before CNC and EDM work.
After the first trial, provide agreed T1 samples and initial dimensional records to check assembly clearances, snap fits and appearance.
Use measured deviations to assess tool corrections or holding-pressure adjustments. Agree on first-article inspection records and color approval before production release.
Run the approved process, apply the agreed sampling plan and retain resin lot traceability.
Pack to the order requirements. Record tool maintenance and the approved revision for reorders.
| Feature | Review items |
|---|---|
| File check, standard and complex quotes | 2–4 h · 24 h · 48–72 h |
| Prototype mold, standard tool and complex T0/T1 | 10–15 business days · 3–4 weeks · 4–6 weeks |
| Simple and weld-add tool changes | 2–4 business days · 5–7 business days |
| T1 dispatch and pilot run after approval | 2–3 business days · 500–3,000 pcs / 5–10 business days |
| Production first lot and repeat shipments | 10,000–500,000+ pcs · 2–3 weeks |
| Trial samples and economic batch planning | 20–50 pcs · 100–500 pcs · 1,000–3,000+ pcs · 10,000+ pcs |
Quote timing starts with complete CAD, toleranced drawings, annual volume and resin or finish requirements. Confirm mold lead time and lot size per project.
A drawing, quantity and contact details are enough to start. Add other requirements if you know them.
Review draft, wall thickness, gates and material shrinkage first. Use the printed part to check assembly and flag critical dimensions on the molded-part drawing.
Consider resin abrasiveness, expected cycles, change frequency and finish. Review aluminum for qualifying prototypes and a steel tool for higher wear or planned repeat runs.
Tool and drawing ownership transfers to the customer after payment under the contract. Use the tool ID, cycle records and approved part revision for reorders. Agree on storage and transfer terms in the contract.
Agree on the as-molded or conditioned state, the time and environment, and the inspection method before first-article approval.