Skip to content

PolyJet multi-material 3D printing

Combine rigid, rubber-like and transparent regions in one prototype to check fit, grip and appearance before tooling.

Send a STEP or STP model with separately named solids. KeepWin reviews the material combination, build direction and support access with its PolyJet production partner.

Handheld prototype with a clear window and dark grip areas
0.014–0.027 mmPolyJet layer thickness by mode
490 × 390 × 200 mmOne-piece build envelope
±0.10 mmTypical linear tolerance up to 50 mm

Choose between PolyJet, SLA, powder-bed printing and vacuum casting

Compare how each process builds hard, soft and clear features. Scroll the table to see all four routes.

Engineering criterionPolyJetSLA MJF / SLS Vacuum casting
Layer thickness0.014–0.027 mm0.05–0.10 mm0.08 mm / 0.10–0.12 mmSurface is replicated from a master.
Rigid and flexible regionsPrint together with a compatible material combination.Usually one resin per build. Review separate parts for mixed materials.Choose one powder for the build.Evaluate a secondary casting or overmolding step.
Clear windowsVeroClear with accessible surfaces for finishing.Clear photopolymer with suitable post-processing.Typical polymer powders yield opaque parts.Clear casting resin with a finished master.
As-built linear tolerance±0.10 mm (≤50 mm) / ±0.15%±0.10 mm (≤100 mm) / ±0.15%±0.20 mm (≤100 mm) / ±0.25% / ±0.25 mm (≤100 mm) / ±0.30%Depends on master, mold and cure shrinkage.
Order and tooling considerationsAppearance and assembly samples with several material zones.Fine-detail prototypes in a selected resin.Functional parts and nested short runs.Repeat parts from a reusable silicone mold.
Planning lead timeAllow for support removal and the specified finish.Allow for cleaning, post-cure and finishing.Allow for cooling, depowdering and finishing.Allow for master, mold and casting cycles.

Choose the route by what the prototype must prove

Use PolyJet to assess grip, color layout or a clear window in an assembled form. For sustained loads, chemical exposure or elastomer life testing, compare the intended production material and process.

PolyJet materials and digital blends

Add every material you want reviewed, then identify the grade, color and target hardness for each CAD body. Available combinations depend on the printing platform.

Base resin and digital blend hardness

Agilus30 is the flexible base resin. Compatible digital formulations can cover Shore A 30–95. Confirm the available hardness and color for the chosen combination.

VeroPureWhite / VeroBlackPlus

Opaque rigid resins for white or black enclosures, bezels and fit samples.

Manufacturer data sheets ↗

VeroClear (RGD810)

Rigid clear resin for viewing windows, light guides and visual checks of accessible channels. Define the area and performance to verify.

Manufacturer data sheets ↗

Agilus30

Rubber-like resin for grip patches, buttons and flexible lips in prototypes. The matrix gives base-resin data.

Manufacturer data sheets ↗

Digital ABS Plus

Tough digital material for checking snap fits and assembly under load. Validate repeated cycling with the intended part geometry.

Manufacturer data sheets ↗

Compare material properties

Engineering criterionVeroPureWhite / VeroBlackPlusVeroClear (RGD810)Agilus30Digital ABS Plus
Tensile strength50–65 MPa50–65 MPa2.4–3.1 MPa55–60 MPa
Elongation at break10–25%10–25%220–270%25–40%
HDT at 0.45 MPa45–50 °C45–50 °C—58–68 °C
Flexural modulus2,200–3,200 MPa2,200–3,200 MPa—1,700–2,200 MPa
Shore A hardness——30–35—
Notched Izod impact20–30 J/m20–30 J/m—90–115 J/m

These are supplier reference values. Digital ABS Plus values are for the Objet/J4100/J7/J8 group, and Agilus30 values are for the base resin. Confirm the selected platform and test conditions for acceptance. Digital material data sheet ↗

Design for material boundaries and support access

Use these checks to prepare the CAD model, the drawing and the acceptance criteria for each zone.

Name each material body in the CAD file

Supply independently named, closed STEP or STP bodies for the rigid, soft and clear zones. Use matching interface surfaces. Agree any deliberate overlap or interlock during review.

Give support material an accessible exit

Check bends, length and access from both ends of a cavity. Plan a cutaway or split when needed. SUP705 and SUP706 have different removal procedures, so confirm the support grade and cleaning method by platform.

Define hardness and the intended test

Specify the Shore A target, grip or travel and how it will be tested. For production seal life or chemical resistance, use samples in the intended elastomer.

Mark the optical zone and inspection direction

Identify the working face, viewing direction and any haze or transmission target. Check polishing access and agree which fits to remeasure after coating.

Review the rigid-to-flexible interface

Identify peel direction and thin sections. Review transition width, fillets or a mechanical anchor with a representative sample before applying design loads.

Two sectioned parts showing a network of open channels

PolyJet capabilities and acceptance

Use the envelope, layer thickness and typical tolerance for planning. Review each wall, opening and internal channel against the selected material and access.

Build envelope, tolerances and feature sizes
ItemCapability and conditions
Materials by processVeroPureWhite / VeroBlackPlus / VeroClear · Agilus30 · Digital ABS Plus · Shore A 30–95
One-piece build envelope490 × 390 × 200 mm
Layer thickness0.014–0.027 mm
Typical as-built linear tolerance±0.10 mm (≤50 mm) / ±0.15%
Minimum wall, through hole and channel0.8–1.0 mm · Ø0.8–1.0 mm · 0.6–0.8 mm

Combine compatible rigid and flexible photopolymers for appearance or fit validation. Set final hardness and support access.

Surface finishes
ItemCapability and conditions
SLA/PolyJet finishing and coating400–2,000 · PU / UV · 0.04–0.08 mm · ASTM D3359 4B–5B
Single-side change after blasting or smoothing0.02–0.04 mm

Compare printed and finished surfaces

Assign finishes to individual faces or bodies, and indicate the fits and surfaces to inspect after finishing.

As-printed matte

Matte mode uses support contact to give a more uniform appearance. Agree the visual sample and inspect fine details after support removal.

Frosted and clear round windows beside black rings

Two PolyJet application examples

These examples show what to check on the prototype before moving to production materials.

Handheld enclosure with soft grip and keys

Evaluate Vero for the rigid shell and an Agilus-based formulation for grip and key regions. Use the CAD assembly to review the internal board and snap features.

Check grip, key travel and mating dimensions on the assembled prototype.

Clear test channels and light guides

Evaluate VeroClear for viewing the flow path or guiding light. Compare a split channel with a one-piece layout when the support cannot be reached directly.

Agree the flow or residue inspection method and which optical faces to polish.

Inspection and traceability

Select the records to request. Confirm the features, sample size and acceptance criteria.

Dimensional inspection or first-article report

Identify datums, critical dimensions and the method for inspecting the finished part.

Shore A hardness check

For ASTM D2240, agree specimen thickness, the test surface and reading time.

Resin lot traceability

Specify the base resin, blend identification and process records needed for reorders.

Internal cleanliness and optical appearance

Agree how to check residual support, surface blemishes and haze under the specified lighting.

Gloved operator uses a handheld gauge at an inspection station

From material zoning to protected shipment

Six stages link CAD review to final inspection and packing.

  1. Review the drawing and material zones

    Check named bodies, target hardness and optical faces.

  2. Plan orientation and supports

    Set the visible faces and access for support removal.

  3. Jet and cure the designated resins

    Assign each zone the agreed resin and compatible layer mode.

  4. Remove supports and finish surfaces

    Clean the part before polishing, masking or coating.

  5. Inspect the agreed features

    Record dimensions, hardness or optical condition as specified.

  6. Pack and identify the batch

    Protect optical and soft features and include the agreed records.

Packaging for clear and flexible parts

Separate parts in individual compartments. Specify plugs, film or antistatic packaging when required.

Submit drawings for PolyJet review

Attach material, finish and inspection choices to your CAD inquiry. Indicate the relevant color, Shore A target and viewing faces for each region.

PolyJet project requirements

Materials · Surface finishes · Inspection and delivery

Choose a material, finish or inspection option above, or enter a note.

Submit drawings and project inquiry

Drawings & reference files

STEP/STP, PDF, JPG or PNG. Up to 3 files; 10 MB each, 20 MB total.

No files selected

    No drawing yet? Describe the part and application below.

    PolyJet printing FAQs

    How does PolyJet differ from SLA and MJF?

    PolyJet jets and cures resin droplets to build compatible material zones. SLA cures liquid resin in a vat, usually one formulation per build. MJF uses agents and heat to fuse powder.

    What can Agilus30 prototypes verify?

    Check grip, button travel and fit. Use the planned production elastomer for lifetime, thermal cycling or chemical resistance tests.

    Can I submit a single assembly file?

    Yes, when the STEP or STP assembly has independent, named solids. Include a color and hardness map if the file names leave any ambiguity.

    How can I see through a VeroClear channel block?

    Polish accessible viewing faces and approve a sample. For long or enclosed channels, assess support removal through access ports or a split design.

    KEEPWIN · LANGUAGE

    Choose your language

    Select the language you prefer for your visit.

    You can change your language anytime in the menu.