Skip to content

Precision wire EDM machining

Evaluate wire EDM for through-profiles in conductive materials, including die inserts, precision fixtures and metal AM build release. Plan wire access and measure the cut in its final state.

Process illustration

Process options and design checks

External profile cutting

Plan the entry from an edge. Agree holding points, allowance for subsequent operations and how the cut part will be supported when released.

Capabilities and acceptance criteria

Feature or requirementWhat to specify and verify
Material and accessUse electrically conductive stock. Provide alloy, hardness, stock thickness and through-cuts versus cavities. Review alternate routes for blind cavities.
Profile and geometryState the finished profile tolerance, datum, maximum inside corner radius and any taper. Agree the sections to measure across the part thickness.
Surface state and inspectionAgree Ra and measuring direction under the drawing standard. Where fatigue, sealing or subsequent coating matters, specify how to assess the altered surface layer.

Technical references · ISO 21920-2 · Makino · Wire EDM

Typical parts and what to inspect

Process examples for engineering review

Hardened mold insert

Review closed through-profile, start-hole position and internal corner radius. Verify profile and taper across the cut thickness.

Metal AM build plate release

Agree the separation plane, pre-cut heat treatment if specified, and machining stock for final datums. Check the part after release.

From drawing review to release

  1. Review the drawing

    Check geometry, alloy, hardness and stock thickness.

  2. Confirm the route

    Agree wire entry, fixturing, cutting sequence and measurement.

  3. Verify first articles

    Verify specified profiles, tapers and surface condition.

  4. Release the batch

    Record release condition and protect the cut face in packing.

Frequently asked questions

Can a wire cut an enclosed blind pocket?

Wire EDM needs a through-path for the wire. For a blind cavity, review sinker EDM or a milling route that can reach the feature.

What sets the smallest internal corner radius?

Review wire diameter plus the discharge gap, then check part thickness, taper and the required finish. Verify any critical corner on a trial part.

Send drawings for engineering review

Engineering review brief

Choose a process focus and describe the critical requirements. Your choices will be included in the enquiry.

Drawings & reference files

STEP/STP, PDF, JPG or PNG. Up to 3 files; 10 MB each, 20 MB total.

No files selected

    No drawing yet? Describe the part and application below.

    KEEPWIN · LANGUAGE

    Choose your language

    Select the language you prefer for your visit.

    You can change your language anytime in the menu.