Skip to content

Advanced photopolymer 3D printing

Choose a resin around the part’s load, fit and exposure. Compare toughness, stiffness and heat deflection in the condition you plan to test.

Send CAD, drawings, quantity and service conditions. KeepWin reviews compatible resin and print platforms with production partners, then agrees the post-cure and inspection scope.

Resin tooling block with brass inserts beside a clear sample
±0.10 mmTypical SLA tolerance up to 100 mm
0.05–0.10 mmTypical industrial SLA layer thickness
0.014–0.027 mmPolyJet layer thickness by mode
132 / 268 °CPerFORM HDT at 0.46 MPa, UV / UV + thermal

Plan the resin manufacturing route

Add a process, repeat-batch requirement or inspection priority to the engineering brief.

Custom 3D printing process selection

Use geometry and test goals to choose the first prototype route. Review a different process if the production material or load case requires it.

Industrial SLA stereolithography

Evaluate detail, build size and suitable Somos grades. Agree support locations on cosmetic and mating surfaces.

PolyJet multi-material printing

Define named hard, soft and transparent zones for prototypes that need grip, appearance or fit evaluation.

Short runs and repeat orders

Record the approved drawing, resin, build orientation and finish so subsequent orders can be reviewed against the same baseline.

CMM and dimensional inspection

Choose a CMM, optical or functional gauge method based on datum access, feature geometry and the finished state.

Controlled cleaning and finishing

Match washing, support removal, cure and surface finish to the resin and the faces that need inspection.

Five engineering checks for resin parts

Open a topic to see what to include in the drawing and validation plan.

Start with a measurable property target

A stiff fixture, an impact-loaded clip and a heat-exposed housing can require different resins. Define the load, deflection limit, temperature, exposure duration and expected number of cycles. A request for the strongest resin leaves these tradeoffs unresolved.

Use relevant supplier data to shortlist candidates, then assess the actual geometry. High stiffness does not automatically imply high impact tolerance, and a high heat-deflection value does not by itself establish a continuous-use temperature for every load. Explain which failure mode the design must avoid.

Black resin features and a specimen beside a height gauge

Compare resin printing capabilities and acceptance

Review the process with the exact grade, orientation and post-processing state.

Engineering criterionSLA DLP / LCD (mSLA)PolyJet
As-built linear tolerance±0.10 mm (≤100 mm) / ±0.15%Confirm for the selected resin and platform.±0.10 mm (≤50 mm) / ±0.15%
Layer thickness0.05–0.10 mmConfirm for the selected resin and platform.0.014–0.027 mm
Wall, through hole and cleaning channel0.8–1.0 mm · Ø0.8–1.0 mm · 0.6–0.8 mmReview wall, hole and cleaning access by geometry.0.8–1.0 mm · Ø0.8–1.0 mm · 0.6–0.8 mm
Example grade combinationsSomos Taurus · Somos PerFORMLOCTITE 3D IND405 · LOCTITE 3D PRO476Vero · Agilus30 · Digital ABS Plus
What to verify before approvalCritical dimensions after cure and properties in the agreed test state.Printer compatibility, exposure parameters and grade-specific cure.Support access, material boundaries and final hardness or appearance.

The SLA and PolyJet dimensions are planning references. The drawing and agreed inspection state govern acceptance.

Material qualification and test conditions
ItemCapability and conditions
Tough, heat-resistant and ceramic-filled optionsLoctite 3D IND405 / PRO476 · Somos Taurus / PerFORM
Validation for the selected build platformHDT · ASTM D638 / D790 · 85 °C / 85% RH · QUV
Build orientation and validation
ItemCapability and conditions
Heat, ageing and witness couponsHDT 0.45 / 1.82 MPa · 85 °C / 85% RH · QUV · ASTM D638 / D790

Four engineering resins compared

Check the grades you want to compare. Add one grade or a shortlist of alternatives to the engineering brief for platform review.

LOCTITE 3D IND405

High-elongation resin for snap-fit trials, housings and clear fluid-path models. Specify Clear or Black when requesting a quote.

Manufacturer data sheets ↗

LOCTITE 3D PRO476

Black engineering resin optimized for LCD printing. Evaluate it for detailed housings, covers and fixtures. For any flammability target, specify the test, wall thickness and required evidence separately.

Manufacturer data sheets ↗

Somos Taurus

Tough SLA resin for functional prototypes, ducts and fixtures. Review the effect of the specified thermal post-cure on stiffness, impact and heat deflection.

Manufacturer data sheets ↗

Somos PerFORM

Ceramic-filled SLA resin for rigid tooling and heat-test samples. Review brittle failure risk and agree the post-cure and service load before testing.

Manufacturer data sheets ↗

Compare selected grades

Select materials above or compare all four to see the property table.

Six stages from drawing review to repeat supply

Agree the release condition for each stage before committing to repeat batches.

  1. Review drawings and service conditions

    Record datums, interfaces, load, temperature and planned tests.

  2. Confirm resin and platform

    Agree the grade, compatible exposure settings and layer mode.

  3. Build the first article and remove supports

    Protect critical faces and use the approved cleaning sequence.

  4. Post-cure to the required condition

    Use the approved UV cycle and thermal step where applicable.

  5. Inspect in the finished state

    Use the agreed dimensional or functional checks after cure and finishing.

  6. Protect parts and archive the batch

    Prevent contact damage and save the approved build and inspection records.

Quality records for your order

Select the records you need. Confirm their format, test methods and availability for the selected resin and process.

Resin lot traceability

Identify the resin grade and batch used for the approved build.

First-article inspection report (FAI)

Agree which features to record and which drawing revision governs release.

CMM dimensional report

Specify datums, probe access, measurement state and report dimensions.

Post-cure process record

Agree whether to record UV exposure, thermal time and temperature, or the approved work instruction.

RoHS / REACH documentation request

Identify the required declaration and application so supplier documentation can be checked for the selected grade.

Submit drawings for resin-printing review

Attach the selected process, resin alternatives, design checks and quality records to your CAD inquiry.

Resin-printing project requirements

Process routes · DFM guide · Materials · Inspection and delivery

Select a process, design topic, resin or quality record above, or enter a note.

Submit drawings and project inquiry

Drawings & reference files

STEP/STP, PDF, JPG or PNG. Up to 3 files; 10 MB each, 20 MB total.

No files selected

    No drawing yet? Describe the part and application below.

    Engineering FAQs before ordering

    Does an ABS-like resin contain the same material as molded ABS?

    Not necessarily. The label often describes selected behavior rather than identical chemistry. Compare the relevant grade data and validate the application.

    Does a high heat-deflection temperature guarantee long-term hot service?

    No. The test has defined loading and conditions. Actual service also depends on load, time, geometry and environment.

    Are all engineering resins available on every printer?

    No. Material-system compatibility and processing requirements must be confirmed for the proposed route.

    KEEPWIN · LANGUAGE

    Choose your language

    Select the language you prefer for your visit.

    You can change your language anytime in the menu.