Skip to content

SLA 3D printing for clear and finished parts

Use SLA for fine geometry, assembly checks and appearance prototypes. Select the resin, post-cure and finish around the surfaces that need to fit or stay clear.

Send a STEP/STP model with critical dimensions, the target color or clarity and any areas to mask. Larger one-piece builds need an orientation and distortion review.

Opaque and clear SLA enclosures on a workbench
0.05–0.10 mmTypical SLA layer thickness
1500 × 750 × 550 mmLarge-format build envelope subject to review
±0.03–0.05 mmSelected features after secondary work

Choose the finish for the validation task

Review the print and cleaning, how the resin will be post-cured, and which surfaces must be polished or painted.

Laser vat exposure and resin removal

A laser cures the photopolymer layer by layer. Plan liquid drainage and cleaning access for hollow bodies and blind channels before building.

Controlled post-cure and local operations

Use the approved cure cycle for the resin. Specify reamed holes and inserts separately, with bore size, remaining wall and the installation method for the cured material.

Clear polishing and cosmetic paint

Polish accessible clear surfaces and evaluate a compatible clear coat when specified. For paint, agree a color and gloss sample and identify surfaces to mask.

Process routesWhen to consider itWhat to verifyTypical production lead time
Standard cleaned and post-cured finishFunctional prototypes and assembly checksPrint dimensions, fit and allowed support marks2–4 business days
Cosmetic sanding and PU/UV paintShow models, finished enclosures and color samplesColor, gloss, film thickness and masked interfaces4–6 business days
Clear polishing and optional clear coatViewing windows, flow models and light guidesClarity sample, access for polishing and scratch limits4–6 business days

Three SLA application examples

Match each validation task to the resin and define the finished features to inspect.

Clear fluid-path and light-guide models

Evaluate WaterShed XC 11122 for viewing flow. Check resin drainage, the accessible polish area and the required clarity, and specify any leak test separately.

Wind-tunnel model and test duct

Evaluate ceramic-filled Somos PerFORM where stiffness and heat response matter. Verify the cure, load, temperature and exposure period for the test setup.

Snap-fit housing with inserts

Evaluate Somos Taurus for repeated assembly. Set snap deflection, insert installation and pull-out or torque checks around the boss geometry.

Plan drainage, support marks and masked fits

Mark the A-surfaces, viewing areas and critical holes on the drawing.

Wall thickness and drainage

Review thin walls for warping after cure. Place drain and vent openings where resin can flow out and the cavity can be washed and inspected. Size them for the cavity and resin.

Two versions of a housing with supports and after surface preparation

Six resin grades and side-by-side comparison

Choose up to two grades to compare. Send both as alternatives or specify a single grade in the inquiry.

Scroll the table to see the data and applications.

Resin gradeMaterial familyTensile data · ASTM D638HDT · 0.455–0.46 MPaTypical applications
Tough charcoal resin46.9 MPa (at yield, UV post-cure) · 49 MPa (at yield, thermal post-cure)62 °C (UV post-cure) · 91 °C (thermal post-cure)Snap-fits and functional housings
White ABS-like resin56.8 MPa (at yield)52 °C (UV post-cure)Fine-detail housings and painted prototypes
Clear resin50.4 MPa (at break, UV post-cure)50 °C (UV post-cure)Viewing windows and fluid paths
Ceramic-filled resin68 MPa (UV post-cure) · 80 MPa (thermal post-cure)132 °C (UV post-cure) · 268 °C (thermal post-cure)Stiff tooling and test models
Tough clear photopolymer52 ± 3 MPa (at break, post-processed)53 °C (post-processed)Clear guards and flexing parts
Tough black LCD photopolymer39–42 MPa (at break, post-processed)60–62 °C (post-processed)Fixtures, black housings and covers

Typical data are from the manufacturers. Confirm the resin, color, printer and cure for the part. HDT is measured under load and does not define continuous service temperature. Review LOCTITE grades on a validated photopolymer platform.

Selected grades

Select a grade in the table to start comparing.

More SLA resins and finishes

Confirm the exact grade, color and platform during engineering review.

  • ABS-Like Black (Accura 7820)
  • ABS-Like Gray (Accura Xtreme Gray)
  • High-detail ABS-like SLA resin (grade review)
  • ABS-Like Value (N3D-MODEL333)
  • ABS-Like White (Accura Xtreme White 200)
  • Formlabs ESD Resin
  • Formlabs Flame Retardant Resin
  • Formlabs Flexible 80A Resin
  • Formlabs High Temp Resin
  • Formlabs Rigid 10K Resin
  • Formlabs Rigid 4000 Resin
  • Formlabs Standard Resin
  • Formlabs Tough 1500 Resin
  • Formlabs Tough 2000 Resin
  • Formlabs Translucent/Clear Resin
  • Metal Plated Ceramic-Like (PerFORM)
  • PC-Like Advanced High Temp (Accura 5530)
  • PC-Like Translucent/Clear (Accura 60)
  • PP-Like Translucent White (Somos 9120)

SLA build limits and finish acceptance

Review geometry in the as-printed state and check critical interfaces after the agreed finish.

ItemCapability and conditions
Materials by processSomos Taurus / EvoLVe 128 / WaterShed XC 11122 / PerFORM · Loctite 3D IND405 / PRO476
One-piece build envelope800 × 800 × 550 mm · 1,500 × 750 × 550 mm
Layer thickness0.05–0.10 mm
Typical as-built linear tolerance±0.10 mm (≤100 mm) / ±0.15%
Selected features after secondary work±0.03–0.05 mm
Minimum wall, through hole and channel0.8–1.0 mm · Ø0.8–1.0 mm · 0.6–0.8 mm

The first volume is standard. WaterShed is a transparent photopolymer. PerFORM is ceramic-filled. Review supports, post-cure and local reaming separately.

Inspect dimensions, finish and packing

Agree critical dimensions, reference samples and areas that need scratch protection for shipping.

CMM and first-article inspection

Check warping and the position of critical holes after cure or secondary work. Agree the datum setup and first-article report scope.

Film thickness, adhesion and clarity

Use the agreed measurement method for coating thickness and compare color and gloss to the reference. Inspect clear faces under the agreed lighting and viewing conditions.

Scratch protection for delivery

Wrap clear or glossy faces in a suitable non-abrasive layer. Use fitted supports to prevent direct contact and movement during transit.

The path from drawing review to release

  1. Review drawings and resin
  2. Set orientation and supports
  3. Print the approved geometry
  4. Wash and post-cure
  5. Finish and inspect the part
  6. Protect the finish and ship

Send drawings for SLA review

Specify the resin, finish and secondary operations. Attach the brief with any notes about color, clarity or fit.

SLA project requirements

Secondary operations and acceptance records

Your choices and entered requirements will appear here.

Submit drawings and project inquiry

Drawings & reference files

STEP/STP, PDF, JPG or PNG. Up to 3 files; 10 MB each, 20 MB total.

No files selected

    No drawing yet? Describe the part and application below.

    SLA printing FAQs

    How clear can a polished SLA part be?

    For a viewing window or flow model, agree an appearance sample and the surfaces that can be polished. Imaging optics need their own requirements for transmission, haze and surface geometry.

    Why add drainage openings to a hollow part?

    Uncured resin can remain trapped in a closed cavity. Drain and vent openings let it flow out and provide access for cleaning and inspection. Placement depends on orientation and geometry.

    Can SLA parts be used in heat or outdoors?

    Select the resin and cure for the load, temperature and exposure duration. Assess humidity, UV exposure and coating durability for outdoor use. Request service-specific validation if those conditions are critical.

    KEEPWIN · LANGUAGE

    Choose your language

    Select the language you prefer for your visit.

    You can change your language anytime in the menu.