Skip to content

Plastic injection molding and tooling engineering

From rapid T1 validation with aluminum tooling to multi-cavity production with S136 or H13 steel tools. Upload your 3D CAD and key requirements for DFM feedback, a review of flow risks and a quote by project stage.

Two light-colored molded enclosure halves on a granite inspection surface
±0.015–0.030 mmCritical fits in PC, ABS and PC/ABS
10–15Prototype tooling to first trial, business days
50–1,300 tfClamping force range
SPI 101–105Tooling classes for project review

Four injection molding routes and how to choose

Use your target volume, level of part integration and tooling budget to compare mold materials, gate design and the main cost drivers.

Rapid prototype and bridge tooling

Trial parts in the intended resin help assess shrinkage, snap fits and assembly before committing to a production tool.

Process details ↗

Multi-cavity production tooling

Balance filling, cooling and cavity-to-cavity consistency for repeat orders. Assess tool steel and the runner system in the quote.

Process details ↗

Two-shot and soft-touch overmolding

Pair a rigid substrate with a compatible elastomer. Verify adhesion or mechanical retention and check grip or sealing requirements.

Process details ↗

Insert molding with metal components

Locate threaded inserts, bushings or contacts in the tool. Define position, resin coverage and pull-out or torque checks as required.

Process details ↗
RouteExample tool materialsProduction stageT1 trial timingRunner and gate planningCost driver
Rapid prototype and bridge tooling7075-T6 / P20Trial and bridge volume10–15 business daysCold runner or simple gateTool investment and design iteration
Multi-cavity production toolingH13 / S136 / 718HRepeat production3–4 weeksBalance cavities and assess hot runnerCavity count, automation and cycle time
Two-shot and soft-touch overmoldingNAK80 / S136Integrated assembliesConfirm with the tool planGate sequence for the substrate and soft layerSecond molding setup and assembly savings
Insert molding with metal componentsH13 / S136Integrated assembliesConfirm with the tool planPlan flow around insert locationsInsert loading, locating and inspection

Representative molded parts

These examples cover wearable support housings, transparent optical components and fluid valve bodies. Mark critical fits, visible surfaces and functional checks on the drawing.

Wearable support housing

Check the fit of clips, bosses and mating surfaces. Set the assembled reference and the method for checking warpage.

Transparent optics cover

Define the clear aperture, resin and light transmission or haze targets. Agree on where gates and weld lines can appear.

Engineering polymer valve body

Assess PEEK by grade, service temperature and fluid compatibility. Define thread geometry, sealing surfaces and any functional test.

Tooling, DFM and molding tolerances

Review geometry, ejection and cosmetic requirements before tool design. Match acceptance dimensions to the material and measurement conditions.

FeatureReview items
Corrosion-resistant or high-polish toolingS136 / Stavax ESR · HRC 48–52 · 1.2083 / 1.2316
Wear-resistant tooling8407 / Orvar Supreme · HRC 48–52 · NAK80 HRC 37–41 · ASP-23 / HAP40
Prototype or short-run toolingP20 / 718H HRC 30–36. 7075-T6 aluminum tooling for selected unfilled resin prototypes.
Cavities and runner balance1 / 2 / 4 / 8 / 16 / 32 / 64 cavities; family tools with adjustable flow and valve-gated hot runners as required.
SPI 101 / 102 / 103≥1,000,000 · 500,000–1,000,000 · 100,000–500,000
SPI 104 / 10510,000–100,000 · Al 5,000–10,000
Customer tool ownership and transferCustomer ownership after payment as contracted, with drawings, asset identification, cycle counter, preventive maintenance and transfer support.

The listed cycle figures are planning ranges. Define the required life, resin and maintenance conditions when ordering the mold.

Engineering resin selection

Specify virgin or customer-supplied resin as needed. Verify shrinkage, heat performance and any COA, TDS or applicable UL 94 documentation for the exact grade. Obtain written approval for resin substitutions or regrind.

Resin familyExample gradesSelection criteriaTypical uses
ABSChi Mei PA-757 · SABIC Cycolac MG47Surface appearance and grade-specific flame rating.Consumer housings and cosmetic panels.
PCCovestro Makrolon 2405 · SABIC Lexan 141RImpact requirements, light transmission and haze for clear grades.Optical covers and impact-resistant housings.
PC/ABSCovestro Bayblend T65 XF · SABIC Cycoloy C2950Balance appearance, impact and application temperature.Device panels and handheld enclosures.
PA6 / PA66 / PA12BASF Ultramid B3S / A3EG6 · Zytel 70G33LSpecify filler and moisture-conditioning state.Load-bearing brackets and insert supports.
POMDelrin 100P · Hostaform C9021Check shrinkage, sliding friction and wear.Gears, sliders and moving joints.
PEEK / PPSU / PEIVictrex 450G · Radel R-5000 · ULTEM 1000Verify temperature range, media resistance and exact grade.Fluid-handling and heat-exposed components.
TPE / TPUKraiburg TPESpecify hardness and validate adhesion to the substrate.Soft grips, edging and sealing features.
Additional grades and material documents
FeatureReview items
ABSChi Mei PA-757 / PA-747 · LG HI121H · SABIC Cycolac MG47 / FR15U
PCCovestro Makrolon 2405 / 2805 / 2458 · SABIC Lexan 141R / 940A / EXL1414
PC/ABSCovestro Bayblend T65 XF / FR3010 · SABIC Cycoloy C2950 / MC1300
PA6 / PA66 / PA12 / PPABASF Ultramid B3S / A3EG6 · Zytel 101L / 70G33L · EMS Grilamid TR90
POM / PPHostaform C9021 · Delrin 100P / 500P · Moplen HP500N · Formosa 1120 · SABIC PP 575P
PEEK / PPSU / PEI / PBT / TPU / TPEVictrex 450G · Radel R-5000 · ULTEM 1000 / 1010 · Kraiburg TPE
Customer-supplied or specified resinGrade, origin and lot can be specified. Regrind or substitution requires written approval.
Grade-specific documentsCOA, TDS and SDS. For relevant grades, request filler content, UL 94 Yellow Card by thickness, transmittance, haze or contact-compliance documentation.
Liquid silicone rubber molding ↗ Full injection molding material catalog ↗

Measurement, appearance and protective packaging

Define which characteristics need first-article records, production sampling or separate functional testing.

Optical and coordinate measurement

Use VMM or CMM where appropriate for the dimensions and datum system. Record conditioning and inspection coverage in the plan.

D65 color and appearance checks

Compare with the approved color sample under the specified light. Define limits for visible flash, parting lines and gate marks.

Protective trays and ESD options

Separate cosmetic and optical surfaces in fitted trays. Specify cleanliness, ESD protection and lot identification if the project requires them.

Six steps from CAD review to production delivery

  1. 01

    DFM and flow review

    Check wall transitions, draft, parting and gate location before settling the tool concept.

  2. 02

    Tool design and manufacture

    Confirm tooling material, cavities and coating or texture before CNC and EDM work.

  3. 03

    T1 trial and samples

    After the first trial, provide agreed T1 samples and initial dimensional records to check assembly clearances, snap fits and appearance.

  4. 04

    First article and tool corrections

    Use measured deviations to assess tool corrections or holding-pressure adjustments. Agree on first-article inspection records and color approval before production release.

  5. 05

    Production and in-process checks

    Run the approved process, apply the agreed sampling plan and retain resin lot traceability.

  6. 06

    Protective packing and mold storage

    Pack to the order requirements. Record tool maintenance and the approved revision for reorders.

Molding quote and production schedule
FeatureReview items
File check, standard and complex quotes2–4 h · 24 h · 48–72 h
Prototype mold, standard tool and complex T0/T110–15 business days · 3–4 weeks · 4–6 weeks
Simple and weld-add tool changes2–4 business days · 5–7 business days
T1 dispatch and pilot run after approval2–3 business days · 500–3,000 pcs / 5–10 business days
Production first lot and repeat shipments10,000–500,000+ pcs · 2–3 weeks
Trial samples and economic batch planning20–50 pcs · 100–500 pcs · 1,000–3,000+ pcs · 10,000+ pcs

Quote timing starts with complete CAD, toleranced drawings, annual volume and resin or finish requirements. Confirm mold lead time and lot size per project.

Submit CAD drawings for DFM and a quote

A drawing, quantity and contact details are enough to start. Add other requirements if you know them.

Drawings & reference files

STEP/STP, PDF, JPG or PNG. Up to 3 files; 10 MB each, 20 MB total.

No files selected

    No drawing yet? Describe the part and application below.

    Plastic injection molding FAQs

    Can I mold the same part I validated with 3D printing?

    Review draft, wall thickness, gates and material shrinkage first. Use the printed part to check assembly and flag critical dimensions on the molded-part drawing.

    How do I choose aluminum or steel tooling?

    Consider resin abrasiveness, expected cycles, change frequency and finish. Review aluminum for qualifying prototypes and a steel tool for higher wear or planned repeat runs.

    How are mold ownership, storage and reorders handled?

    Tool and drawing ownership transfers to the customer after payment under the contract. Use the tool ID, cycle records and approved part revision for reorders. Agree on storage and transfer terms in the contract.

    How do you check dimensions on moisture-sensitive resins like PA?

    Agree on the as-molded or conditioned state, the time and environment, and the inspection method before first-article approval.

    KEEPWIN · LANGUAGE

    Choose your language

    Select the language you prefer for your visit.

    You can change your language anytime in the menu.