Mark logos, batch IDs, serial numbers or direct-part codes. Review the actual substrate and coating, marking location, production data and how readability will be verified.
Example drawing callout for depth
0.15 ±0.03 mm
Formal DPM quality test reference
ISO/IEC 29158:2025
Part sampling schedule estimate
1–3 days
Confirm scheduling and acceptance after reviewing the substrate, artwork and inspection scope.
Laser marking workstation, a fixtured metal plate and parts with sample codes
Choosing between fiber, MOPA fiber, UV and CO₂
Compare the routes on the actual substrate and finish. Verify contrast, thermal effects and marking area on a real sample.
Engineering criterion
Fiber · 1064 nm class
MOPA fiber · adjustable pulses
UV · 355 nm
CO₂ · 10.6 μm class
Typical substrates
Metal parts, including selected stainless, titanium and aluminum alloys.
Selected stainless or titanium for dark marks and selected anodized or coated metals.
Selected molded plastics. Confirm the exact resin, pigment and additives.
Review for nonmetal labels, packaging or suitable coated surfaces.
Marking mechanism
Review material removal for engraving and contrast on actual metal.
Adjust pulse width and energy for surface color or selective removal.
Establish reliable contrast with limits on foaming, melt edges and distortion.
Check absorption and thermal effects on the actual nonmetal or coating.
Fine-feature limits
Confirm minimum stroke and depth together on a coupon.
Verify edge definition and repeatability across the marking field.
Check small text, modules and quiet zones on the final part.
Use a real sample to check edge definition and readable size.
Typical use
Metal scales, mold IDs and engraved identifiers.
Dark mark on stainless or a light mark on compatible anodized parts.
Molded part lot codes and small symbols.
Larger markings on suitable labels or packaging.
Laser marking routes and design review
Annealing and selective coating removal
Trial contrast or selective coating removal on the finished part. Specify whether exposing the substrate is allowed and assess any effect on its protective coating.
Evaluate dark annealed marks on stainless and selective light marks on anodized aluminum separately. If the coating protects the part, test the affected area under project conditions.
Depth-controlled metal engraving
Specify depth and measurement points when the mark must be recessed. Review edge distance, remaining wall, burr or debris, and whether finishing follows the engraving.
For example, specify 0.15 ±0.03 mm on the drawing and define where to measure it. Confirm the final depth after finishing and check for raised edges.
Data Matrix and variable serial numbers
Define payload and serialization. Select Data Matrix or QR as specified, reserve the required quiet zone, and agree the verifier and illumination before approving the first marked part.
Approve a sample data file and resolve duplicates, skipped numbers and rework before marking. When formal grading is required, agree aperture and illumination and verify decoded data separately.
Rotary marking and UV marking of plastics
For round parts, provide diameter, seam position, orientation and the allowed marking arc. Review rotary fixturing, focus and read access on the assembled part.
Test 355 nm UV on the actual resin and color. Inspect contrast, foaming, melting and distortion before approving the molded sample.
Laser parameters and acceptance criteria
Compare four processes. Approve the result on a representative sample before setting production limits for depth, position or readability.
MOPA annealed dark marking
Typical use
Evaluate on the specified stainless or titanium alloy and actual polish or brushing. Approve the dark tone and permitted heat tint.
What to verify
Verify contrast and edge definition. Agree separate corrosion testing where the marked area is exposed to sweat, cleaners or other corrosive conditions.
Fiber deep engraving
Typical use
Specify depth, minimum stroke, wall left after engraving and any functional faces to avoid.
What to verify
Measure depth at the agreed points and after the last surface treatment. Inspect raised material and legibility.
Selective anodized or PVD coating removal
Typical use
State whether only the top layer may be removed or whether base metal exposure is allowed. Review the new edge of the protective coating.
What to verify
Approve the actual anodized or PVD lot finish. Check the marked surface after any required cleaning, wear or corrosion exposure.
UV marking on molded plastics
Typical use
Select the actual resin, pigment and additives before testing. Include the molded finish, texture and any coating.
What to verify
Inspect color change, melted edges and deformation. Verify readability again if resin lot, color or texture changes.
What to verify
Test method
Drawing and acceptance requirements
Artwork and placement
Use the approved artwork and fixture datum. Check offset, orientation and size in the named area on the first part.
Send vector artwork or approved data fields. Dimension the marking box, reference datum and orientation in the drawing; approve a finished sample.
Contrast, depth and finish
Compare against a limit sample under agreed lighting. For recessed features, use calibrated optical or profile measurement appropriate to the geometry.
Specify contrast by a limit sample and any engraving depth in mm. Sample each substrate–finish combination, including coating removal or discoloration limits.
Code quality and data
Separate ordinary scan checks from formal verification. A formal DPM report records the measured grade and verification conditions.
For direct part marks, agree an applicable ISO/IEC 29158 verification setup and minimum grade. Check payload, syntax and uniqueness separately against the approved data.
Sequence and durability
Repeat the agreed appearance or readability test after applicable coating, cleaning or wear exposure.
Identify whether marking is before or after anodizing, plating or painting. If cleaning or abrasion matters, verify the approved mark after the agreed exposure.
Choose the marking zone and inspection based on the real material, finish and end use.
Decorative logos on watch clasps and cases
Approve the placement and appearance on the same brushed, polished or coated finish as production.
Traceability marks on housings and instrument parts
Use a flat, accessible zone away from seals and wearing faces. For regulated identifiers such as UDI, the device owner must define the applicable data and validation requirements.
Lot codes and symbols on molded parts
Trial the actual resin and color; inspect contrast, surface deformation and legibility after handling.
Code verification, depth measurement and surface protection
DPM quality and data controls
A reader checks decoding. For formal grading, agree the verifier, illumination, aperture and minimum grade. Check uniqueness and payload against the approved file independently.
Depth and master-sample comparison
Measure the profile from the agreed local surface at the designated points. Check contrast and edge clarity against an approved sample under specified lighting.
Protection of marked faces
Check protective film for clean removal. Orient finished faces to avoid rubbing and use the packaging record to preserve batch traceability.
From artwork review to lot release
Artwork, data and finish review
Approve artwork, fields, datum and finish revision.
Fixturing and trial marking
Trial settings and marking order on real parts.
1–3 days · Part sampling schedule estimate
First article and read approval
Sign appearance and validate code or depth where specified.
Variable data and lot release
Check variable data by lot and record the approved revision.
3–7 days · Batch marking schedule estimate
Frequently asked questions
Can coated metal and plastic use the same settings?
Review each substrate, color and coating separately. Establish contrast, heat effects and any coating damage on a real sample.
Is a successful scan enough for acceptance?
Agree whether simple reading or formal grading is required. For graded codes, record lighting and verifier settings and check data integrity separately.
What should be supplied for variable marking?
Provide sample payloads, ranges, formatting rules and the mapping to work orders. State how duplicates, skipped numbers and reworked parts should be recorded.
Can annealed marks affect stainless corrosion resistance?
It depends on the alloy, surface and heat input. Where corrosion matters, trial the actual conditions and verify the marked area against the agreed test and exposure.
Should marking happen before or after coating?
Review both sequences with the final appearance and corrosion requirement. Coating can fill a recess, while post-coating removal can expose metal. Approve the final state on a sample.
Can a small code be marked on a cylindrical surface?
Provide diameter, allowed arc, code size and scan orientation. Verify focus and mark distortion on a representative part, then check access with the intended reader.
Send drawings for engineering review
Send an approved artwork file or a sample data sheet with the marking area, material, surface condition, quantity and required inspection.
Engineering review brief
Choose a process focus and describe the critical requirements. Your choices will be included in the enquiry.